Aarrow Ecoburn 7 Wood

The Aarrow Ecoburn 7 Wood. For those who take the environment seriously we can offer the highly efficient Ecoburn wood burning and multi fuel stove. An Ecoburn stove gives you more control over how you burn your fuel, enabling you to generate more heat, using less fuel, so contributing to a cleaner environment. Aarrow has achieved this through a combination of clever environmental features and excellence in engineering.
The Aarrow Ecoburn 7 Wood burning and multi fuel stove has a gently curved steel body, large fire viewing area and concealed dust free hinges to complement its performance.

Haas and Sohn Zeta Cast grey/ceramics pistazie

Esse 700-27B Stove

The 700 is the latest stove to be born at our foundry and is the flagship model in our new look range. It may be our latest stove but it firmly upholds the virtues and qualities of ESSEs, dating back over a century and a half. Every line and curve has been designed to exude an air of simple elegance, that will sit comfortably with a wide range of interior styles and hearth environments. The gently arching double doors provide a spectacular and virtually unrestricted view of the flames. This view is further enhanced by our unique handle-less door opening mechanism which uses a spring loaded latch with a key release on the side of the stove. Suitable for larger dwellings requiring higher outputs, the 700 multi-fuel features Afterburn™, our precision secondary air control system. Providing outstanding control of the burn, stunning flame patterns and an efficient combustion of the fuel. 9 kW of heat to the room and 8 kW to water can be expected.

Ecofan 800 Black and Brass

The 800 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Quattro-PLUS Flue Liner 316L Grade - Solid Fuel 180mm (7 inch)

WARRANTY
316L Grade Flue Liner is warranted for 10 years (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.

CONSTRUCTION
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.